四色半自动水墨印刷开槽机
There four Semi-automatic ink printing slotting machine
主要技术参数：
* 型号 过纸长度 印刷长度 工作速度（片/分）
* 2400 2400mm 2200mm （片/分）：60 5.5kw
* 版辊φ468mm 内档2500 mm
Model | Paper length | Printing length | Working speed | power | roller | Inner baffle |
2500 | 2450mm | 2200mm | 60 pieces | 5.5kw | φ468mm | 2500mm |
功能与特点：
* 整机墙板厚度实心为40mm、重要部件、均由高精度加工中心制做The thickness of the solid core wallboard is 40mm; the key parts are all made by high-precision machining center.
* 所有传动轴、辊材质均为优质钢，高精度动平衡校正、镀硬铬，表面研磨。All driving shaft and roller are high quality steel, high-precision dynamic balance correction, hard chromium plating and surface grinding.
* 主轴锁紧采用高钢性涨套锁紧，比传统键锁紧精度更高，方便拆装。Main shaft locking using high rigidity of locking, have higher accuracy than the traditional key locking , convenient to dismounted
* 全齿轮传动，钢件淬火斜齿传动，长期使用，套色精度高.All the gear transmission, steel parts quenching inclined gear transmission, is used for a long time, high precision adjustment
* 整机传动部位采用卫星摇摆式、消除连接间隙、适合长期高速印刷，三层、五层、七层纸板套色精度更高。The transmission part adopts satellite swing type, eliminating connection clearance, suitable for long time high-speed printing. Matching color precision is higher for 3-layer, 5-layer and 7-layer.
主要技术参考：
* 机械速度（片/分）：80
* 经济速度（片/分）：50—60
* 最大印刷面积：2200mm×1450mm
* 最大纸板尺寸：2400mm×1450m
* 标准印版厚度：3—8(可调)
* 开槽刀厚：7mm
* Max mechanical speed (piece/min):80
* Economic speed (piece/min): 50-60
* Max printing area: 2200mm×1450mm
* Max paperboard size: 2400mm×1450mm
* Thickness of standard printing plate: 3-8mm (can adjust)
* Thickness of slotting knife: 7mm
印刷部功能：
* 本机为链条送料半自动印刷机
* 采用重型地轨，保证设备运行及分离的稳定性
* 气动隔膜泵供墨方式，可以任意调整上墨的流量，提高上墨均匀度。（不含气泵
* 机采用360度电脑数控快速相位调整，读数盘显示，附有自动计数装置。
* 全摇板设计，全齿轮传动，减少套色误差，调整轴间隙时齿轮咬合间隙不变。
* 进纸设计为十字滑块，加强精度
* 主动齿轮全钢件淬火，保证使用寿命。
* 墨辊部可气动升起并单独转动，以防停机时油墨干涸
* 各机组电动分合体，自动锁紧，放松，附有警铃提示
* 各机组电动分离，配有碟璜式离合，气动分离锁
* 配置同步调刀，使机器调整时间大量减少，提高生产效率
* 开槽、压痕、间隙调整采用自锁卧轮合结构
* 采用喷淋油泵分组供油，提高设备润滑
* 全设备使用φ25冷拔（不用镀锌管）调节，减少拧曲误差
* 压印轴与过纸轴全部直径为φ130mm
Printing part functions:
- 1. This machine is common printing machine of chain feeding.
- 2. Adopt heavy rail to ensure the equipment’s stability of working and separating.
- 3. Pneumatic diaphragm pump give the ink, you can adjust the flow of the ink at will to improve ink evenness (not including air pump)
- 4. Adopts 360 degrees computer numerical control rapid phase adjustment, reading dial set, with an automatic counting device.
- 5. The rocker panel design and all the gears transmission to reduce the errors of color-matching. When adjust the axis space, the meshing gap remains the same.
- 6. The paper-feeding way was designed to cross slipper to strengthen the accuracy.
- 7. The gears are steel parts quenched, ensure service life.
- 8. Ink roller part can rise pneumatically and run alone, in case printing ink dries up when the machine stop.
- 9. Every unit electrical separating and automatic locking, relaxing, with the alarm hints.
- 10. Every unit is separated by electric, equipped with disc spring type clutch.
- 11. Equipped with synchronous blade adjustment, reduce the time of adjustment to improve production efficiency.
- 12. Slotting, creasing and gap adjusting adopt self-locking structure.
- 13. Use spray pump group oil supplying to improve equipment lubrication.
- 14. All the equipment use cold-drawing (not galvanized tube) adjustment to reduce twisting error.
- 15. The diameter of coining shaft and paper shaft are both 130mm.