小型UV机 立式UV机 UV胶水 油墨 油漆光固化机 现货供应

■设备型号：4012-30
 
■适用范围：紫外线UV油墨光固化、紫外线UV胶水固化、紫外线上光油固化与木地板,木门,傢私的UV淋涂、UV滚涂、UV上光配套，UV光固化干燥，或单独使用。
 
■性能特点：宽幅面，载重能力强，实用.
UV灯布置：上顶灯双灯灯布置；
UV灯的调整：每一支灯高度、角度单独调整；
UV灯采用聚光型设计，固化均匀；
强制风冷，确保UV室温度适宜;
UV灯的更换采用闭合门装置，维护简便。
 
■技术参数：
电源要求：单相三线220VAC（工频交流） 50HZ（赫兹）
整机功率：约2.3KW（千瓦）
外形尺寸：1330 L（长）×520W（宽）×1240H（高） mm
输送速度：0-30 m/min（米/分钟）
输送宽度：300mm（毫米）
网带材料：铁氟龙耐高温网带，配套无动力滚筒
冷却方式：强制风冷
光源类型：高压Hg汞灯
灯线功率：80w/cm
光源配置：1KW *2支。
灯管长度：400MM
光源寿命：按加速等效测试，平均大于1000（h）小时，光衰不低于80％。
主峰波长：365nm（纳米）
典型特点：铝制反射器，多角度固化，适合有一定厚度的产品
典型应用：紫外线UV家俱漆固化、紫外线上光油固化，适应于非防爆要求环境。
 
■应用实例：手机外壳的油墨，UV胶水固化等。 

- equipment model:4012-30
Exergy applicable scope: ultraviolet UV light curing, UV glue UV curing, UV curing varnish and wooden floor, wooden doors, furniture of UV coating, UV roll coating, UV coating, UV curing and drying, or used alone.

- performance characteristics: wide format, strong load-carrying ability, practical.
UV lamp: lamp lamp lamp;
UV lamp adjustment: each lamp height, angle individually adjust;
UV lamp is designed, and the curing is uniform;
Forced air cooling, to ensure that the UV room temperature is appropriate;
The replacement of UV lamp adopts closed door device, which is simple and easy to maintain.

- Technical parameters:
Power requirements: single phase three line 220VAC (power frequency AC) 50HZ (Hz)
Power: about 2.3KW (kw)
Dimensions: 1330 L (long) x 520W (wide) x mm (high) 1240H
Conveyor speed: m/min 0-30 (M / min)
Conveyor width: 300mm (mm)
Belt material: Teflon high-temperature net belt, supporting power roller
Cooling method: forced air cooling
Light source: high pressure mercury lamp type Hg
Lamp power: 80w/cm
Source configuration: *2 1KW.
Tube length: 400MM
The life of the light source: according to the equivalent test, the average more than 1000 hours (H), attenuation of not less than 80%.
Peak wavelength: 365nm (nm)
Typical features: aluminum reflector, multi angle curing, suitable for a certain thickness of the product
Typical application: UV UV furniture paint curing, UV curing, adapted to the non explosion proof requirements.

- Application: mobile phone shell UV ink, glue curing etc..